Extends

• PIXI.TilingSprite
• Phaser.Component.Core
• Phaser.Component.Angle
• Phaser.Component.Animation
• Phaser.Component.AutoCull
• Phaser.Component.Bounds
• Phaser.Component.Destroy
• Phaser.Component.FixedToCamera
• Phaser.Component.InputEnabled
• Phaser.Component.InWorld
• Phaser.Component.LoadTexture
• Phaser.Component.Overlap
• Phaser.Component.PhysicsBody
• Phaser.Component.Reset
• Phaser.Component.Smoothed

Public Properties

alpha : number

The opacity of the object.

Inherited From

• PIXI.DisplayObject#alpha

Source code: pixi/display/DisplayObject.js (Line 65)

anchor :Point

The anchor sets the origin point of the texture. The default is 0,0 this means the texture's origin is the top left Setting than anchor to 0.5,0.5 means the textures origin is centered Setting the anchor to 1,1 would mean the textures origin points will be the bottom right corner

Inherited From

• PIXI.Sprite#anchor

Source code: pixi/display/Sprite.js (Line 22)

angle : number

The angle property is the rotation of the Game Object in degrees from its original orientation.

Values from 0 to 180 represent clockwise rotation; values from 0 to -180 represent counterclockwise rotation.

Values outside this range are added to or subtracted from 360 to obtain a value within the range. For example, the statement player.angle = 450 is the same as player.angle = 90.

If you wish to work in radians instead of degrees you can use the property rotation instead. Working in radians is slightly faster as it doesn't have to perform any calculations.

Inherited From

• Phaser.Component.Angle#angle

Source code: gameobjects/components/Angle.js (Line 29)

animations : Phaser.AnimationManager

If the Game Object is enabled for animation (such as a Phaser.Sprite) this is a reference to its AnimationManager instance. Through it you can create, play, pause and stop animations.

Inherited From

• Phaser.Component.Core#animations

Source code: gameobjects/components/Core.js (Line 173)

See

• Phaser.AnimationManager

autoCull : boolean

A Game Object with autoCull set to true will check its bounds against the World Camera every frame. If it is not intersecting the Camera bounds at any point then it has its renderable property set to false. This keeps the Game Object alive and still processing updates, but forces it to skip the render step entirely.

This is a relatively expensive operation, especially if enabled on hundreds of Game Objects. So enable it only if you know it's required, or you have tested performance and find it acceptable.

Inherited From

• Phaser.Component.AutoCull#autoCull

Default Value

• false

Source code: gameobjects/components/AutoCull.js (Line 28)

blendMode : number

The blend mode to be applied to the sprite

Inherited From

• PIXI.TilingSprite#blendMode

Default Value

• PIXI.blendModes.NORMAL;

Source code: pixi/extras/TilingSprite.js (Line 77)

body : Phaser.Physics.Arcade.Body | Phaser.Physics.P2.Body | Phaser.Physics.Ninja.Body | null

body is the Game Objects physics body. Once a Game Object is enabled for physics you access all associated properties and methods via it.

By default Game Objects won't add themselves to any physics system and their body property will be null.

To enable this Game Object for physics you need to call game.physics.enable(object, system) where object is this object and system is the Physics system you are using. If none is given it defaults to Phaser.Physics.Arcade.

You can alternatively call game.physics.arcade.enable(object), or add this Game Object to a physics enabled Group.

Important: Enabling a Game Object for P2 or Ninja physics will automatically set its anchor property to 0.5, so the physics body is centered on the Game Object.

If you need a different result then adjust or re-create the Body shape offsets manually or reset the anchor after enabling physics.

Type

• Phaser.Physics.Arcade.Body | Phaser.Physics.P2.Body | Phaser.Physics.Ninja.Body | null

Inherited From

• Phaser.Component.PhysicsBody#body

Default Value

• null

Source code: gameobjects/components/PhysicsBody.js (Line 91)

[readonly] bottom : number

The sum of the y and height properties. This is the same as y + height - offsetY.

Inherited From

• Phaser.Component.Bounds#bottom

Source code: gameobjects/components/Bounds.js (Line 110)

cacheAsBitmap : boolean

Set if this display object is cached as a bitmap. This basically takes a snap shot of the display object as it is at that moment. It can provide a performance benefit for complex static displayObjects. To remove simply set this property to 'null'

Inherited From

• PIXI.DisplayObject#cacheAsBitmap

Source code: pixi/display/DisplayObject.js (Line 336)

cameraOffset : Phaser.Point

The x/y coordinate offset applied to the top-left of the camera that this Game Object will be drawn at if fixedToCamera is true.

The values are relative to the top-left of the camera view and in addition to any parent of the Game Object on the display list.

Inherited From

• Phaser.Component.FixedToCamera#cameraOffset

Source code: gameobjects/components/FixedToCamera.js (Line 86)

checkWorldBounds : boolean

If this is set to true the Game Object checks if it is within the World bounds each frame.

When it is no longer intersecting the world bounds it dispatches the onOutOfBounds event.

If it was previously out of bounds but is now intersecting the world bounds again it dispatches the onEnterBounds event.

It also optionally kills the Game Object if outOfBoundsKill is true.

When checkWorldBounds is enabled it forces the Game Object to calculate its full bounds every frame.

This is a relatively expensive operation, especially if enabled on hundreds of Game Objects. So enable it only if you know it's required, or you have tested performance and find it acceptable.

Inherited From

• Phaser.Component.InWorld#checkWorldBounds

Default Value

• false

Source code: gameobjects/components/InWorld.js (Line 92)

[readonly] children : Array.<DisplayObject>

[read-only] The array of children of this container.

Type

• Array.<DisplayObject>

Inherited From

• PIXI.DisplayObjectContainer#children

Source code: pixi/display/DisplayObjectContainer.js (Line 17)

<internal> components : Object

The components this Game Object has installed.

Inherited From

• Phaser.Component.Core#components

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source code: gameobjects/components/Core.js (Line 149)

debug : boolean

A debug flag designed for use with Game.enableStep.

Inherited From

• Phaser.Component.Core#debug

Default Value

• false

Source code: gameobjects/components/Core.js (Line 198)

[readonly] destroyPhase : boolean

As a Game Object runs through its destroy method this flag is set to true, and can be checked in any sub-systems or plugins it is being destroyed from.

Inherited From

• Phaser.Component.Destroy#destroyPhase

Source code: gameobjects/components/Destroy.js (Line 22)

events : Phaser.Events

All Phaser Game Objects have an Events class which contains all of the events that are dispatched when certain things happen to this Game Object, or any of its components.

Inherited From

• Phaser.Component.Core#events

Source code: gameobjects/components/Core.js (Line 165)

See

• Phaser.Events

exists : boolean

Controls if this Game Object is processed by the core game loop. If this Game Object has a physics body it also controls if its physics body is updated or not. When exists is set to false it will remove its physics body from the physics world if it has one. It also toggles the visible property to false as well.

Setting exists to true will add its physics body back in to the physics world, if it has one. It will also set the visible property to true.

Inherited From

• Phaser.Component.Core#exists

Source code: gameobjects/components/Core.js (Line 253)

filterArea :Rectangle

The area the filter is applied to like the hitArea this is used as more of an optimisation rather than figuring out the dimensions of the displayObject each frame you can set this rectangle

Inherited From

• PIXI.DisplayObject#filterArea

Source code: pixi/display/DisplayObject.js (Line 153)

filters : Array.<Filter>

Sets the filters for the displayObject. IMPORTANT: This is a webGL only feature and will be ignored by the canvas renderer. To remove filters simply set this property to 'null'

Type

• Array.<Filter>

Inherited From

• PIXI.DisplayObject#filters

Source code: pixi/display/DisplayObject.js (Line 298)

fixedToCamera : boolean

A Game Object that is "fixed" to the camera uses its x/y coordinates as offsets from the top left of the camera during rendering.

The values are adjusted at the rendering stage, overriding the Game Objects actual world position.

The end result is that the Game Object will appear to be 'fixed' to the camera, regardless of where in the game world the camera is viewing. This is useful if for example this Game Object is a UI item that you wish to be visible at all times regardless where in the world the camera is.

The offsets are stored in the cameraOffset property.

Note that the cameraOffset values are in addition to any parent of this Game Object on the display list.

Be careful not to set fixedToCamera on Game Objects which are in Groups that already have fixedToCamera enabled on them.

Inherited From

• Phaser.Component.FixedToCamera#fixedToCamera

Source code: gameobjects/components/FixedToCamera.js (Line 56)

frame : integer

Gets or sets the current frame index of the texture being used to render this Game Object.

To change the frame set frame to the index of the new frame in the sprite sheet you wish this Game Object to use, for example: player.frame = 4.

If the frame index given doesn't exist it will revert to the first frame found in the texture.

If you are using a texture atlas then you should use the frameName property instead.

If you wish to fully replace the texture being used see loadTexture.

Inherited From

• Phaser.Component.LoadTexture#frame

Source code: gameobjects/components/LoadTexture.js (Line 196)

frameName : string

Gets or sets the current frame name of the texture being used to render this Game Object.

To change the frame set frameName to the name of the new frame in the texture atlas you wish this Game Object to use, for example: player.frameName = "idle".

If the frame name given doesn't exist it will revert to the first frame found in the texture and throw a console warning.

If you are using a sprite sheet then you should use the frame property instead.

If you wish to fully replace the texture being used see loadTexture.

Inherited From

• Phaser.Component.LoadTexture#frameName

Source code: gameobjects/components/LoadTexture.js (Line 221)

[readonly] fresh : boolean

A Game Object is considered fresh if it has just been created or reset and is yet to receive a renderer transform update. This property is mostly used internally by the physics systems, but is exposed for the use of plugins.

Inherited From

• Phaser.Component.Core#fresh

Source code: gameobjects/components/Core.js (Line 228)

game : Phaser.Game

A reference to the currently running Game.

Inherited From

• Phaser.Component.Core#game

Source code: gameobjects/components/Core.js (Line 134)

height : number

The height of the tiling sprite

Inherited From

• PIXI.TilingSprite#height

Source code: pixi/extras/TilingSprite.js (Line 27)

height : number

The height of the TilingSprite, setting this will actually modify the scale to achieve the value set

Inherited From

• PIXI.TilingSprite#height

Source code: pixi/extras/TilingSprite.js (Line 111)

hitArea :Rectangle | Circle | Ellipse | Polygon

This is the defined area that will pick up mouse / touch events. It is null by default. Setting it is a neat way of optimising the hitTest function that the interactionManager will use (as it will not need to hit test all the children)

Type

• Rectangle | Circle | Ellipse | Polygon

Inherited From

• PIXI.DisplayObject#hitArea

Source code: pixi/display/DisplayObject.js (Line 81)

[readonly] inCamera : boolean

Checks if the Game Objects bounds intersect with the Game Camera bounds. Returns true if they do, otherwise false if fully outside of the Cameras bounds.

Inherited From

• Phaser.Component.AutoCull#inCamera

Source code: gameobjects/components/AutoCull.js (Line 37)

input : Phaser.InputHandler | null

The Input Handler for this Game Object.

By default it is disabled. If you wish this Game Object to process input events you should enable it with: inputEnabled = true.

After you have done this, this property will be a reference to the Phaser InputHandler.

Type

• Phaser.InputHandler | null

Inherited From

• Phaser.Component.InputEnabled#input

Source code: gameobjects/components/InputEnabled.js (Line 24)

inputEnabled : boolean

By default a Game Object won't process any input events. By setting inputEnabled to true a Phaser.InputHandler is created for this Game Object and it will then start to process click / touch events and more.

You can then access the Input Handler via this.input.

Note that Input related events are dispatched from this.events, i.e.: events.onInputDown.

If you set this property to false it will stop the Input Handler from processing any more input events.

Inherited From

• Phaser.Component.InputEnabled#inputEnabled

Source code: gameobjects/components/InputEnabled.js (Line 38)

[readonly] inWorld : boolean

Checks if the Game Objects bounds are within, or intersect at any point with the Game World bounds.

Inherited From

• Phaser.Component.InWorld#inWorld

Source code: gameobjects/components/InWorld.js (Line 114)

key : string | Phaser.RenderTexture | Phaser.BitmapData | PIXI.Texture

The key of the image or texture used by this Game Object during rendering. If it is a string it's the string used to retrieve the texture from the Phaser.Cache. It can also be an instance of a RenderTexture, BitmapData or PIXI.Texture. If a Game Object is created without a key it is automatically assigned the key __default which is a 32x32 transparent PNG stored within the Cache. If a Game Object is given a key which doesn't exist in the Cache it is re-assigned the key __missing which is a 32x32 PNG of a green box with a line through it.

Type

• string | Phaser.RenderTexture | Phaser.BitmapData | PIXI.Texture

Inherited From

• Phaser.Component.Core#key

Source code: gameobjects/components/Core.js (Line 183)

[readonly] left : number

The left coordinate of the Game Object. This is the same as x - offsetX.

Inherited From

• Phaser.Component.Bounds#left

Source code: gameobjects/components/Bounds.js (Line 59)

mask : PIXI.Graphics

Sets a mask for the displayObject. A mask is an object that limits the visibility of an object to the shape of the mask applied to it. In PIXI a regular mask must be a PIXI.Graphics object. This allows for much faster masking in canvas as it utilises shape clipping. To remove a mask, set this property to null.

Inherited From

• PIXI.DisplayObject#mask

Source code: pixi/display/DisplayObject.js (Line 273)

name : string

A user defined name given to this Game Object. This value isn't ever used internally by Phaser, it is meant as a game level property.

Inherited From

• Phaser.Component.Core#name

Source code: gameobjects/components/Core.js (Line 142)

[readonly] offsetX : number

The amount the Game Object is visually offset from its x coordinate. This is the same as width * anchor.x. It will only be > 0 if anchor.x is not equal to zero.

Inherited From

• Phaser.Component.Bounds#offsetX

Source code: gameobjects/components/Bounds.js (Line 24)

[readonly] offsetY : number

The amount the Game Object is visually offset from its y coordinate. This is the same as height * anchor.y. It will only be > 0 if anchor.y is not equal to zero.

Inherited From

• Phaser.Component.Bounds#offsetY

Source code: gameobjects/components/Bounds.js (Line 42)

outOfBoundsKill : boolean

If this and the checkWorldBounds property are both set to true then the kill method is called as soon as inWorld returns false.

Inherited From

• Phaser.Component.InWorld#outOfBoundsKill

Default Value

• false

Source code: gameobjects/components/InWorld.js (Line 100)

[readonly] parent : PIXI.DisplayObjectContainer

[read-only] The display object container that contains this display object.

Inherited From

• PIXI.DisplayObject#parent

Source code: pixi/display/DisplayObject.js (Line 98)

pivot :Point

The pivot point of the displayObject that it rotates around

Inherited From

• PIXI.DisplayObject#pivot

Source code: pixi/display/DisplayObject.js (Line 49)

position :Point

The coordinate of the object relative to the local coordinates of the parent.

Inherited From

• PIXI.DisplayObject#position

Source code: pixi/display/DisplayObject.js (Line 14)

[readonly] previousPosition : Phaser.Point

The position the Game Object was located in the previous frame.

Inherited From

• Phaser.Component.Core#previousPosition

Source code: gameobjects/components/Core.js (Line 205)

[readonly] previousRotation : number

The rotation the Game Object was in set to in the previous frame. Value is in radians.

Inherited From

• Phaser.Component.Core#previousRotation

Source code: gameobjects/components/Core.js (Line 212)

renderable : boolean

Whether this sprite is renderable or not

Inherited From

• PIXI.TilingSprite#renderable

Default Value

• true

Source code: pixi/extras/TilingSprite.js (Line 59)

[readonly] renderOrderID : number

The render order ID is used internally by the renderer and Input Manager and should not be modified. This property is mostly used internally by the renderers, but is exposed for the use of plugins.

Inherited From

• Phaser.Component.Core#renderOrderID

Source code: gameobjects/components/Core.js (Line 220)

[readonly] right : number

The right coordinate of the Game Object. This is the same as x + width - offsetX.

Inherited From

• Phaser.Component.Bounds#right

Source code: gameobjects/components/Bounds.js (Line 76)

rotation : number

The rotation of the object in radians.

Inherited From

• PIXI.DisplayObject#rotation

Source code: pixi/display/DisplayObject.js (Line 57)

scale :Point

The scale factor of the object.

Inherited From

• PIXI.DisplayObject#scale

Source code: pixi/display/DisplayObject.js (Line 22)

shader : PIXI.AbstractFilter

The shader that will be used to render the texture to the stage. Set to null to remove a current shader.

Inherited From

• PIXI.Sprite#shader

Default Value

• null

Source code: pixi/display/Sprite.js (Line 77)

smoothed : boolean

Enable or disable texture smoothing for this Game Object.

It only takes effect if the Game Object is using an image based texture.

Smoothing is enabled by default.

Inherited From

• Phaser.Component.Smoothed#smoothed

Source code: gameobjects/components/Smoothed.js (Line 25)

[readonly] stage : PIXI.Stage

[read-only] The stage the display object is connected to, or undefined if it is not connected to the stage.

Inherited From

• PIXI.DisplayObject#stage

Source code: pixi/display/DisplayObject.js (Line 107)

texture : PIXI.Texture

The texture that the sprite is using

Inherited From

• PIXI.Sprite#texture

Source code: pixi/display/Sprite.js (Line 33)

tilePosition :Point

The offset position of the image that is being tiled

Inherited From

• PIXI.TilingSprite#tilePosition

Source code: pixi/extras/TilingSprite.js (Line 51)

tileScale :Point

The scaling of the image that is being tiled

Inherited From

• PIXI.TilingSprite#tileScale

Source code: pixi/extras/TilingSprite.js (Line 35)

tileScaleOffset :Point

A point that represents the scale of the texture object

Inherited From

• PIXI.TilingSprite#tileScaleOffset

Source code: pixi/extras/TilingSprite.js (Line 43)

tint : number

The tint applied to the sprite. This is a hex value

Inherited From

• PIXI.TilingSprite#tint

Default Value

• 0xFFFFFF

Source code: pixi/extras/TilingSprite.js (Line 68)

[readonly] top : number

The y coordinate of the Game Object. This is the same as y - offsetY.

Inherited From

• Phaser.Component.Bounds#top

Source code: gameobjects/components/Bounds.js (Line 93)

transformCallback : Function

The transform callback is an optional callback that if set will be called at the end of the updateTransform method and sent two parameters: This Display Objects worldTransform matrix and its parents transform matrix. Both are PIXI.Matrix object types. The matrix are passed by reference and can be modified directly without needing to return them. This ability allows you to check any of the matrix values and perform actions such as clamping scale or limiting rotation, regardless of the parent transforms.

Inherited From

• PIXI.DisplayObject#transformCallback

Source code: pixi/display/DisplayObject.js (Line 30)

transformCallbackContext : Object

The context under which the transformCallback is invoked.

Inherited From

• PIXI.DisplayObject#transformCallbackContext

Source code: pixi/display/DisplayObject.js (Line 41)

[readonly] type : number

The const type of this object.

Source code: gameobjects/TileSprite.js (Line 49)

visible : boolean

The visibility of the object.

Inherited From

• PIXI.DisplayObject#visible

Source code: pixi/display/DisplayObject.js (Line 73)

width : number

The with of the tiling sprite

Inherited From

• PIXI.TilingSprite#width

Source code: pixi/extras/TilingSprite.js (Line 19)

width : number

The width of the sprite, setting this will actually modify the scale to achieve the value set

Inherited From

• PIXI.TilingSprite#width

Source code: pixi/extras/TilingSprite.js (Line 95)

world : Phaser.Point

The world coordinates of this Game Object in pixels. Depending on where in the display list this Game Object is placed this value can differ from position, which contains the x/y coordinates relative to the Game Objects parent.

Inherited From

• Phaser.Component.Core#world

Source code: gameobjects/components/Core.js (Line 191)

[readonly] worldAlpha : number

[read-only] The multiplied alpha of the displayObject

Inherited From

• PIXI.DisplayObject#worldAlpha

Source code: pixi/display/DisplayObject.js (Line 116)

worldVisible : boolean

[read-only] Indicates if the sprite is globally visible.

Inherited From

• PIXI.DisplayObject#worldVisible

Source code: pixi/display/DisplayObject.js (Line 249)

x : number

The position of the displayObject on the x axis relative to the local coordinates of the parent.

Inherited From

• PIXI.DisplayObject#x

Source code: pixi/display/DisplayObject.js (Line 672)

x : number

The position of the Game Object on the x axis relative to the local coordinates of the parent.

Inherited From

• Phaser.Component.PhysicsBody#x

Source code: gameobjects/components/PhysicsBody.js (Line 98)

y : number

The position of the Game Object on the y axis relative to the local coordinates of the parent.

Inherited From

• Phaser.Component.PhysicsBody#y

Source code: gameobjects/components/PhysicsBody.js (Line 124)

y : number

The position of the displayObject on the y axis relative to the local coordinates of the parent.

Inherited From

• PIXI.DisplayObject#y

Source code: pixi/display/DisplayObject.js (Line 690)

z : number

The z depth of this Game Object within its parent Group. No two objects in a Group can have the same z value. This value is adjusted automatically whenever the Group hierarchy changes.

Inherited From

• Phaser.Component.Core#z

Source code: gameobjects/components/Core.js (Line 157)

Public Methods

addChild(child) → {PIXI.DisplayObject}

Adds a child to the container.

Parameters

Name	Type	Description
child	PIXI.DisplayObject	The DisplayObject to add to the container

Returns

PIXI.DisplayObject -

The child that was added.

Inherited From

• PIXI.DisplayObjectContainer#addChild

Source code: pixi/display/DisplayObjectContainer.js (Line 92)

addChildAt(child, index) → {PIXI.DisplayObject}

Adds a child to the container at a specified index. If the index is out of bounds an error will be thrown

Parameters

Name	Type	Description
child	PIXI.DisplayObject	The child to add
index	Number	The index to place the child in

Returns

PIXI.DisplayObject -

The child that was added.

Inherited From

• PIXI.DisplayObjectContainer#addChildAt

Source code: pixi/display/DisplayObjectContainer.js (Line 104)

autoScroll(x, y)

Sets this TileSprite to automatically scroll in the given direction until stopped via TileSprite.stopScroll(). The scroll speed is specified in pixels per second. A negative x value will scroll to the left. A positive x value will scroll to the right. A negative y value will scroll up. A positive y value will scroll down.

Parameters

Name	Type	Description
x	number	Horizontal scroll speed in pixels per second.
y	number	Vertical scroll speed in pixels per second.

Source code: gameobjects/TileSprite.js (Line 114)

destroy(destroyChildren)

Destroys the TileSprite. This removes it from its parent group, destroys the event and animation handlers if present and nulls its reference to game, freeing it up for garbage collection.

Parameters

Name	Type	Argument	Default	Description
destroyChildren	boolean	<optional>	true	Should every child of this object have its destroy method called?

Source code: gameobjects/TileSprite.js (Line 143)

generateTexture(resolution, scaleMode, renderer) → {PIXI.Texture}

Useful function that returns a texture of the displayObject object that can then be used to create sprites This can be quite useful if your displayObject is static / complicated and needs to be reused multiple times.

Parameters

Name	Type	Description
resolution	Number	The resolution of the texture being generated
scaleMode	Number	See {{#crossLink "PIXI/scaleModes:property"}}PIXI.scaleModes{{/crossLink}} for possible values
renderer	PIXI.CanvasRenderer | PIXI.WebGLRenderer	The renderer used to generate the texture.

Returns

PIXI.Texture -

a texture of the graphics object

Inherited From

• PIXI.DisplayObject#generateTexture

Source code: pixi/display/DisplayObject.js (Line 495)

generateTilingTexture(forcePowerOfTwo)

Parameters

Name	Type	Description
forcePowerOfTwo	Boolean	Whether we want to force the texture to be a power of two

Inherited From

• PIXI.TilingSprite#generateTilingTexture

Source code: pixi/extras/TilingSprite.js (Line 371)

getBounds() → {Rectangle}

Returns the framing rectangle of the sprite as a PIXI.Rectangle object

Returns

Rectangle -

the framing rectangle

Inherited From

• PIXI.TilingSprite#getBounds

Source code: pixi/extras/TilingSprite.js (Line 278)

getChildAt(index) → {PIXI.DisplayObject}

Returns the child at the specified index

Parameters

Name	Type	Description
index	Number	The index to get the child from

Returns

PIXI.DisplayObject -

The child at the given index, if any.

Inherited From

• PIXI.DisplayObjectContainer#getChildAt

Source code: pixi/display/DisplayObjectContainer.js (Line 195)

getChildIndex(child) → {Number}

Returns the index position of a child DisplayObject instance

Parameters

Name	Type	Description
child	PIXI.DisplayObject	The DisplayObject instance to identify

Returns

Number -

The index position of the child display object to identify

Inherited From

• PIXI.DisplayObjectContainer#getChildIndex

Source code: pixi/display/DisplayObjectContainer.js (Line 160)

getLocalBounds() → {Rectangle}

Retrieves the non-global local bounds of the displayObjectContainer as a rectangle. The calculation takes all visible children into consideration.

Returns

Rectangle -

The rectangular bounding area

Inherited From

• PIXI.DisplayObjectContainer#getLocalBounds

Source code: pixi/display/DisplayObjectContainer.js (Line 364)

loadTexture(key, frame, stopAnimation)

Changes the base texture the Game Object is using. The old texture is removed and the new one is referenced or fetched from the Cache.

If your Game Object is using a frame from a texture atlas and you just wish to change to another frame, then see the frame or frameName properties instead.

You should only use loadTexture if you want to replace the base texture entirely.

Calling this method causes a WebGL texture update, so use sparingly or in low-intensity portions of your game, or if you know the new texture is already on the GPU.

Parameters

Name	Type	Argument	Default	Description
key	string | Phaser.RenderTexture | Phaser.BitmapData | PIXI.Texture			This is the image or texture used by the Sprite during rendering. It can be a string which is a reference to the Cache entry, or an instance of a RenderTexture, BitmapData or PIXI.Texture.
frame	string | number	<optional>		If this Sprite is using part of a sprite sheet or texture atlas you can specify the exact frame to use by giving a string or numeric index.
stopAnimation	boolean	<optional>	true	If an animation is already playing on this Sprite you can choose to stop it or let it carry on playing.

Inherited From

• Phaser.Component.LoadTexture#loadTexture

Source code: gameobjects/components/LoadTexture.js (Line 36)

overlap(displayObject) → {boolean}

Checks to see if the bounds of this Game Object overlaps with the bounds of the given Display Object, which can be a Sprite, Image, TileSprite or anything that extends those such as Button or provides a getBounds method and result.

This check ignores the hitArea property if set and runs a getBounds comparison on both objects to determine the result.

Therefore it's relatively expensive to use in large quantities, i.e. with lots of Sprites at a high frequency. It should be fine for low-volume testing where physics isn't required.

Parameters

Name	Type	Description
displayObject	Phaser.Sprite | Phaser.Image | Phaser.TileSprite | Phaser.Button | PIXI.DisplayObject	The display object to check against.

Returns

boolean -

True if the bounds of this Game Object intersects at any point with the bounds of the given display object.

Inherited From

• Phaser.Component.Overlap#overlap

Source code: gameobjects/components/Overlap.js (Line 29)

play(name, frameRate, loop, killOnComplete) → {Phaser.Animation}

Plays an Animation.

The animation should have previously been created via animations.add.

If the animation is already playing calling this again won't do anything. If you need to reset an already running animation do so directly on the Animation object itself or via AnimationManager.stop.

Parameters

Name	Type	Argument	Default	Description
name	string			The name of the animation to be played, e.g. "fire", "walk", "jump". Must have been previously created via 'AnimationManager.add'.
frameRate	number	<optional>	null	The framerate to play the animation at. The speed is given in frames per second. If not provided the previously set frameRate of the Animation is used.
loop	boolean	<optional>	false	Should the animation be looped after playback. If not provided the previously set loop value of the Animation is used.
killOnComplete	boolean	<optional>	false	If set to true when the animation completes (only happens if loop=false) the parent Sprite will be killed.

Returns

Phaser.Animation -

A reference to playing Animation.

Inherited From

• Phaser.Component.Animation#play

Source code: gameobjects/components/Animation.js (Line 31)

<internal> postUpdate()

Internal method called by the World postUpdate cycle.

Inherited From

• Phaser.Component.Core#postUpdate

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source code: gameobjects/components/Core.js (Line 307)

preUpdate()

Automatically called by World.preUpdate.

Source code: gameobjects/TileSprite.js (Line 87)

removeChild(child) → {PIXI.DisplayObject}

Removes a child from the container.

Parameters

Name	Type	Description
child	PIXI.DisplayObject	The DisplayObject to remove

Returns

PIXI.DisplayObject -

The child that was removed.

Inherited From

• PIXI.DisplayObjectContainer#removeChild

Source code: pixi/display/DisplayObjectContainer.js (Line 212)

removeChildAt(index) → {PIXI.DisplayObject}

Removes a child from the specified index position.

Parameters

Name	Type	Description
index	Number	The index to get the child from

Returns

PIXI.DisplayObject -

The child that was removed.

Inherited From

• PIXI.DisplayObjectContainer#removeChildAt

Source code: pixi/display/DisplayObjectContainer.js (Line 227)

removeChildren(beginIndex, endIndex)

Removes all children from this container that are within the begin and end indexes.

Parameters

Name	Type	Description
beginIndex	Number	The beginning position. Default value is 0.
endIndex	Number	The ending position. Default value is size of the container.

Inherited From

• PIXI.DisplayObjectContainer#removeChildren

Source code: pixi/display/DisplayObjectContainer.js (Line 245)

removeStageReference()

Removes the current stage reference from the container and all of its children.

Inherited From

• PIXI.DisplayObjectContainer#removeStageReference

Source code: pixi/display/DisplayObjectContainer.js (Line 404)

reset(x, y)

Resets the TileSprite. This places the TileSprite at the given x/y world coordinates, resets the tilePosition and then sets alive, exists, visible and renderable all to true. Also resets the outOfBounds state. If the TileSprite has a physics body that too is reset.

Parameters

Name	Type	Description
x	number	The x coordinate (in world space) to position the Sprite at.
y	number	The y coordinate (in world space) to position the Sprite at.

Returns

(Phaser.TileSprite) This instance.

Source code: gameobjects/TileSprite.js (Line 159)

resetFrame()

Resets the texture frame dimensions that the Game Object uses for rendering.

Inherited From

• Phaser.Component.LoadTexture#resetFrame

Source code: gameobjects/components/LoadTexture.js (Line 174)

setChildIndex(child, index)

Changes the position of an existing child in the display object container

Parameters

Name	Type	Description
child	PIXI.DisplayObject	The child DisplayObject instance for which you want to change the index number
index	Number	The resulting index number for the child display object

Inherited From

• PIXI.DisplayObjectContainer#setChildIndex

Source code: pixi/display/DisplayObjectContainer.js (Line 177)

setFrame(frame)

Sets the texture frame the Game Object uses for rendering.

This is primarily an internal method used by loadTexture, but is exposed for the use of plugins and custom classes.

Parameters

Name	Type	Description
frame	Phaser.Frame	The Frame to be used by the texture.

Inherited From

• Phaser.Component.LoadTexture#setFrame

Source code: gameobjects/components/LoadTexture.js (Line 117)

setStageReference(stage)

Sets the containers Stage reference. This is the Stage that this object, and all of its children, is connected to.

Parameters

Name	Type	Description
stage	PIXI.Stage	the stage that the container will have as its current stage reference

Inherited From

• PIXI.DisplayObjectContainer#setStageReference

Source code: pixi/display/DisplayObjectContainer.js (Line 388)

setTexture(texture)

Sets the texture of the sprite

Parameters

Name	Type	Description
texture	PIXI.Texture	The PIXI texture that is displayed by the sprite

Inherited From

• PIXI.Sprite#setTexture

Source code: pixi/display/Sprite.js (Line 137)

stopScroll()

Stops an automatically scrolling TileSprite.

Source code: gameobjects/TileSprite.js (Line 131)

swapChildren(child, child2)

Swaps the position of 2 Display Objects within this container.

Parameters

Name	Type	Description
child	PIXI.DisplayObject	-
child2	PIXI.DisplayObject	-

Inherited From

• PIXI.DisplayObjectContainer#swapChildren

Source code: pixi/display/DisplayObjectContainer.js (Line 135)

toGlobal(position) → {Point}

Calculates the global position of the display object

Parameters

Name	Type	Description
position	Point	The world origin to calculate from

Returns

Point -

A point object representing the position of this object

Inherited From

• PIXI.DisplayObject#toGlobal

Source code: pixi/display/DisplayObject.js (Line 529)

toLocal(position, from) → {Point}

Calculates the local position of the display object relative to another point

Parameters

Name	Type	Argument	Description
position	Point		The world origin to calculate from
from	PIXI.DisplayObject	<optional>	The DisplayObject to calculate the global position from

Returns

Point -

A point object representing the position of this object

Inherited From

• PIXI.DisplayObject#toLocal

Source code: pixi/display/DisplayObject.js (Line 543)

update()

Override this method in your own custom objects to handle any update requirements. It is called immediately after preUpdate and before postUpdate. Remember if this Game Object has any children you should call update on those too.

Inherited From

• Phaser.Component.Core#update

Source code: gameobjects/components/Core.js (Line 297)

updateCache()

Generates and updates the cached sprite for this object.

Inherited From

• PIXI.DisplayObject#updateCache

Source code: pixi/display/DisplayObject.js (Line 519)