new Time(game)
This is the core internal game clock.
It manages the elapsed time and calculation of elapsed values, used for game object motion and tweens, and also handles the standard Timer pool.
To create a general timed event, use the master Phaser.Timer accessible through events.
There are different types of time in Phaser:
Game time always runs at the speed of time in real life.
Unlike wall-clock time, game time stops when Phaser is paused.
Game time is used for timer events.
Physics time represents the amount of time given to physics calculations.
When slowMotion is in effect physics time runs slower than game time. Like game time, physics time stops when Phaser is paused.
Physics time is used for physics calculations and tweens.
Wall-clock time represents the duration between two events in real life time.
This time is independent of Phaser and always progresses, regardless of if Phaser is paused.
Parameters
Name | Type | Description |
---|---|---|
game |
Phaser.Game | A reference to the currently running game. |
- Source code: time/Time.js (Line 38)
Public Properties
-
advancedTiming : boolean
-
If true then advanced profiling, including the fps rate, fps min/max, suggestedFps and msMin/msMax are updated.
- Source code: time/Time.js (Line 165)
-
desiredFps : integer
-
The desired frame rate of the game.
This is used is used to calculate the physic / logic multiplier and how to apply catch-up logic updates. The desired frame rate of the game. Defaults to 60.
- Source code: time/Time.js (Line 596)
-
<internal> desiredFpsMult : integer
-
The desiredFps multiplier as used by Game.update.
- Internal:
- This member is internal (protected) and may be modified or removed in the future.
- Source code: time/Time.js (Line 126)
-
<internal> elapsed : number
-
Elapsed time since the last time update, in milliseconds, based on
now
.This value may include time that the game is paused/inactive.
Note: This is updated only once per game loop - even if multiple logic update steps are done. Use physicsTime as a basis of game/logic calculations instead.
- Internal:
- This member is internal (protected) and may be modified or removed in the future.
- Source code: time/Time.js (Line 86)
- See
-
- Phaser.Time.time
-
<internal> elapsedMS : integer
-
The time in ms since the last time update, in milliseconds, based on
time
.This value is corrected for game pauses and will be "about zero" after a game is resumed.
Note: This is updated once per game loop - even if multiple logic update steps are done. Use physicsTime as a basis of game/logic calculations instead.
- Internal:
- This member is internal (protected) and may be modified or removed in the future.
- Source code: time/Time.js (Line 99)
-
events : Phaser.Timer
-
A Phaser.Timer object bound to the master clock (this Time object) which events can be added to.
- Source code: time/Time.js (Line 245)
-
[readonly] fps : number
-
Advanced timing result: Frames per second.
Only calculated if advancedTiming is enabled.
- Source code: time/Time.js (Line 183)
-
fpsMax : number
-
Advanced timing result: The highest rate the fps has reached (usually no higher than 60fps).
Only calculated if advancedTiming is enabled. This value can be manually reset.
- Source code: time/Time.js (Line 201)
-
fpsMin : number
-
Advanced timing result: The lowest rate the fps has dropped to.
Only calculated if advancedTiming is enabled. This value can be manually reset.
- Source code: time/Time.js (Line 192)
-
[readonly] frames : integer
-
Advanced timing result: The number of render frames record in the last second.
Only calculated if advancedTiming is enabled.
- Source code: time/Time.js (Line 174)
-
<internal> game : Phaser.Game
-
Local reference to game.
- Internal:
- This member is internal (protected) and may be modified or removed in the future.
- Source code: time/Time.js (Line 44)
-
msMax : number
-
Advanced timing result: The maximum amount of time the game has taken between consecutive frames.
Only calculated if advancedTiming is enabled. This value can be manually reset.
- Source code: time/Time.js (Line 220)
-
msMin : number
-
Advanced timing result: The minimum amount of time the game has taken between consecutive frames.
Only calculated if advancedTiming is enabled. This value can be manually reset.
- Default Value
- 1000
- Source code: time/Time.js (Line 211)
-
<internal> now : number
-
An increasing value representing cumulative milliseconds since an undisclosed epoch.
While this value is in milliseconds and can be used to compute time deltas, it must must not be used with
Date.now()
as it may not use the same epoch / starting reference.The source may either be from a high-res source (eg. if RAF is available) or the standard Date.now; the value can only be relied upon within a particular game instance.
- Internal:
- This member is internal (protected) and may be modified or removed in the future.
- Source code: time/Time.js (Line 72)
-
pauseDuration : number
-
Records how long the game was last paused, in milliseconds. (This is not updated until the game is resumed.)
- Source code: time/Time.js (Line 227)
-
physicsElapsed : number
-
The physics update delta, in fractional seconds.
This should be used as an applicable multiplier by all logic update steps (eg.
preUpdate/postUpdate/update
) to ensure consistent game timing. Game/logic timing can drift from real-world time if the system is unable to consistently maintain the desired FPS.With fixed-step updates this is normally equivalent to
1.0 / desiredFps
.- Source code: time/Time.js (Line 112)
-
physicsElapsedMS : number
-
The physics update delta, in milliseconds - equivalent to
physicsElapsed * 1000
.- Source code: time/Time.js (Line 119)
-
<internal> prevTime : number
-
The
now
when the previous update occurred.- Internal:
- This member is internal (protected) and may be modified or removed in the future.
- Source code: time/Time.js (Line 58)
-
slowMotion : number
-
Scaling factor to make the game move smoothly in slow motion
- 1.0 = normal speed
- 2.0 = half speed
- Default Value
- 1
- Source code: time/Time.js (Line 158)
-
suggestedFps : number
-
The suggested frame rate for your game, based on an averaged real frame rate. This value is only populated if
Time.advancedTiming
is enabled.Note: This is not available until after a few frames have passed; until then it's set to the same value as desiredFps.
- Source code: time/Time.js (Line 149)
-
<internal> time : integer
-
The
Date.now()
value when the time was last updated.- Internal:
- This member is internal (protected) and may be modified or removed in the future.
- Source code: time/Time.js (Line 51)
-
<internal> timeExpected : number
-
The time when the next call is expected when using setTimer to control the update loop
- Internal:
- This member is internal (protected) and may be modified or removed in the future.
- Source code: time/Time.js (Line 239)
-
<internal> timeToCall : number
-
The value that setTimeout needs to work out when to next update
- Internal:
- This member is internal (protected) and may be modified or removed in the future.
- Source code: time/Time.js (Line 233)
Public Methods
-
add(timer) → {Phaser.Timer}
-
Adds an existing Phaser.Timer object to the Timer pool.
Parameters
Name Type Description timer
Phaser.Timer An existing Phaser.Timer object.
Returns
The given Phaser.Timer object.
- Source code: time/Time.js (Line 308)
-
<internal> boot()
-
Called automatically by Phaser.Game after boot. Should not be called directly.
- Internal:
- This member is internal (protected) and may be modified or removed in the future.
- Source code: time/Time.js (Line 293)
-
create(autoDestroy) → {Phaser.Timer}
-
Creates a new stand-alone Phaser.Timer object.
Parameters
Name Type Argument Default Description autoDestroy
boolean <optional>
true A Timer that is set to automatically destroy itself will do so after all of its events have been dispatched (assuming no looping events).
Returns
The Timer object that was created.
- Source code: time/Time.js (Line 323)
-
elapsedSecondsSince(since) → {number}
-
How long has passed since the given time (in seconds).
Parameters
Name Type Description since
number The time you want to measure (in seconds).
Returns
number -Duration between given time and now (in seconds).
- Source code: time/Time.js (Line 571)
-
elapsedSince(since) → {number}
-
How long has passed since the given time.
Parameters
Name Type Description since
number The time you want to measure against.
Returns
number -The difference between the given time and now.
- Source code: time/Time.js (Line 560)
-
refresh()
-
Refreshes the Time.time and Time.elapsedMS properties from the system clock.
- Source code: time/Time.js (Line 360)
-
removeAll()
-
Remove all Timer objects, regardless of their state and clears all Timers from the events timer.
- Source code: time/Time.js (Line 342)
-
reset()
-
Resets the private _started value to now and removes all currently running Timers.
- Source code: time/Time.js (Line 582)
-
totalElapsedSeconds() → {number}
-
The number of seconds that have elapsed since the game was started.
Returns
number -The number of seconds that have elapsed since the game was started.
- Source code: time/Time.js (Line 550)
-
<internal> update(time)
-
Updates the game clock and if enabled the advanced timing data. This is called automatically by Phaser.Game.
Parameters
Name Type Description time
number The current relative timestamp; see now.
- Internal:
- This member is internal (protected) and may be modified or removed in the future.
- Source code: time/Time.js (Line 378)