A counter: if more than zero, files will be automatically added as a synchronization point.

If you want to append a URL before the path of any asset you can set this here. Useful if allowing the asset base url to be configured outside of the game code. The string must end with a "/".

Local reference to the Phaser.Cache.

The crossOrigin value applied to loaded images. Very often this needs to be set to 'anonymous'.

If true (the default) then parallel downloading will be enabled.

To disable all parallel downloads this must be set to false prior to any resource being loaded.

Local reference to game.

True if all assets in the queue have finished loading.

True if the Loader is in the process of loading the queue.

The number of concurrent / parallel resources to try and fetch at once.

Many current browsers limit 6 requests per domain; this is slightly conservative.

This event is dispatched when a file has either loaded or failed to load.

Any function bound to this will receive the following parameters:

progress, file key, success?, total loaded files, total files

Where progress is a number between 1 and 100 (inclusive) representing the percentage of the load.

This event is dispatched when a file (or pack) errors as a result of the load request.

For files it will be triggered before onFileComplete. For packs it will be triggered before onPackComplete.

Params: (file key, file)

This event is dispatched immediately before a file starts loading. It's possible the file may fail (eg. download error, invalid format) after this event is sent.

Params: (progress, file key, file url)

This event is dispatched when the final file in the load queue has either loaded or failed.

This event is dispatched when the loading process starts: before the first file has been requested, but after all the initial packs have been loaded.

This event is dispatched when an asset pack has either loaded or failed to load.

This is called when the asset pack manifest file has loaded and successfully added its contents to the loader queue.

Params: (pack key, success?, total packs loaded, total packs)

The value of path, if set, is placed before any relative file path given. For example:

load.path = "images/sprites/"; load.image("ball", "ball.png"); load.image("tree", "level1/oaktree.png"); load.image("boom", "http://server.com/explode.png");

Would load the ball file from images/sprites/ball.png and the tree from images/sprites/level1/oaktree.png but the file boom would load from the URL given as it's an absolute URL.

Please note that the path is added before the filename but after the baseURL (if set.)

The string must end with a "/".

You can optionally link a progress sprite with setPreloadSprite.

This property is an object containing: sprite, rect, direction, width and height

The rounded load progress percentage value (from 0 to 100). See Phaser.Loader#progressFloat.

The non-rounded load progress value (from 0.0 to 100.0).

A general indicator of the progress. It is possible for the progress to decrease, after onLoadStart, if more files are dynamically added.

If true all calls to Loader.reset will be ignored. Useful if you need to create a load queue before swapping to a preloader state.

Add a synchronization point to a specific file/asset in the load queue.

This has no effect on already loaded assets.

Internal function that adds a new entry to the file list. Do not call directly.

Adds a Texture Atlas file to the current load queue.

To create the Texture Atlas you can use tools such as:

Texture Packer Shoebox

If using Texture Packer we recommend you enable "Trim sprite names". If your atlas software has an option to "rotate" the resulting frames, you must disable it.

You can choose to either load the data externally, by providing a URL to a json file. Or you can pass in a JSON object or String via the atlasData parameter. If you pass a String the data is automatically run through JSON.parse and then immediately added to the Phaser.Cache.

If URLs are provided the files are not loaded immediately after calling this method, but are added to the load queue.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getImage(key). JSON files are automatically parsed upon load. If you need to control when the JSON is parsed then use Loader.text instead and parse the JSON file as needed.

The URLs can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the textureURL isn't specified then the Loader will take the key and create a filename from that. For example if the key is "player" and textureURL is null then the Loader will set the URL to be "player.png". The same is true for the atlasURL. If atlasURL isn't specified and no atlasData has been provided then the Loader will set the atlasURL to be the key. For example if the key is "player" the atlasURL will be set to "player.json".

If you do not desire this action then provide URLs and / or a data object.

Adds a Texture Atlas file to the current load queue.

Unlike Loader.atlasJSONHash this call expects the atlas data to be in a JSON Array format.

To create the Texture Atlas you can use tools such as:

Texture Packer Shoebox

If using Texture Packer we recommend you enable "Trim sprite names". If your atlas software has an option to "rotate" the resulting frames, you must disable it.

You can choose to either load the data externally, by providing a URL to a json file. Or you can pass in a JSON object or String via the atlasData parameter. If you pass a String the data is automatically run through JSON.parse and then immediately added to the Phaser.Cache.

If URLs are provided the files are not loaded immediately after calling this method, but are added to the load queue.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getImage(key). JSON files are automatically parsed upon load. If you need to control when the JSON is parsed then use Loader.text instead and parse the JSON file as needed.

The URLs can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the textureURL isn't specified then the Loader will take the key and create a filename from that. For example if the key is "player" and textureURL is null then the Loader will set the URL to be "player.png". The same is true for the atlasURL. If atlasURL isn't specified and no atlasData has been provided then the Loader will set the atlasURL to be the key. For example if the key is "player" the atlasURL will be set to "player.json".

If you do not desire this action then provide URLs and / or a data object.

Adds a Texture Atlas file to the current load queue.

Unlike Loader.atlas this call expects the atlas data to be in a JSON Hash format.

To create the Texture Atlas you can use tools such as:

Texture Packer Shoebox

If using Texture Packer we recommend you enable "Trim sprite names". If your atlas software has an option to "rotate" the resulting frames, you must disable it.

You can choose to either load the data externally, by providing a URL to a json file. Or you can pass in a JSON object or String via the atlasData parameter. If you pass a String the data is automatically run through JSON.parse and then immediately added to the Phaser.Cache.

If URLs are provided the files are not loaded immediately after calling this method, but are added to the load queue.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getImage(key). JSON files are automatically parsed upon load. If you need to control when the JSON is parsed then use Loader.text instead and parse the JSON file as needed.

The URLs can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the textureURL isn't specified then the Loader will take the key and create a filename from that. For example if the key is "player" and textureURL is null then the Loader will set the URL to be "player.png". The same is true for the atlasURL. If atlasURL isn't specified and no atlasData has been provided then the Loader will set the atlasURL to be the key. For example if the key is "player" the atlasURL will be set to "player.json".

If you do not desire this action then provide URLs and / or a data object.

Adds a Texture Atlas file to the current load queue.

This call expects the atlas data to be in the Starling XML data format.

To create the Texture Atlas you can use tools such as:

Texture Packer Shoebox

If using Texture Packer we recommend you enable "Trim sprite names". If your atlas software has an option to "rotate" the resulting frames, you must disable it.

You can choose to either load the data externally, by providing a URL to an xml file. Or you can pass in an XML object or String via the atlasData parameter. If you pass a String the data is automatically run through Loader.parseXML and then immediately added to the Phaser.Cache.

If URLs are provided the files are not loaded immediately after calling this method, but are added to the load queue.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getImage(key). XML files are automatically parsed upon load. If you need to control when the XML is parsed then use Loader.text instead and parse the XML file as needed.

The URLs can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the textureURL isn't specified then the Loader will take the key and create a filename from that. For example if the key is "player" and textureURL is null then the Loader will set the URL to be "player.png". The same is true for the atlasURL. If atlasURL isn't specified and no atlasData has been provided then the Loader will set the atlasURL to be the key. For example if the key is "player" the atlasURL will be set to "player.xml".

If you do not desire this action then provide URLs and / or a data object.

Adds an audio file to the current load queue.

The file is not loaded immediately after calling this method. The file is added to the queue ready to be loaded when the loader starts.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getSound(key).

The URL can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

Mobile warning: There are some mobile devices (certain iPad 2 and iPad Mini revisions) that cannot play 48000 Hz audio. When they try to play the audio becomes extremely distorted and buzzes, eventually crashing the sound system. The solution is to use a lower encoding rate such as 44100 Hz.

Adds an audio sprite file to the current load queue.

The file is not loaded immediately after calling this method. The file is added to the queue ready to be loaded when the loader starts.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Audio Sprites are a combination of audio files and a JSON configuration.

The JSON follows the format of that created by https://github.com/tonistiigi/audiosprite

Retrieve the file via Cache.getSoundData(key).

The URL can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

Adds a binary file to the current load queue.

The file is not loaded immediately after calling this method. The file is added to the queue ready to be loaded when the loader starts.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getBinary(key).

The URL can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the URL isn't specified the Loader will take the key and create a filename from that. For example if the key is "alien" and no URL is given then the Loader will set the URL to be "alien.bin". It will always add .bin as the extension. If you do not desire this action then provide a URL.

It will be loaded via xhr with a responseType of "arraybuffer". You can specify an optional callback to process the file after load. When the callback is called it will be passed 2 parameters: the key of the file and the file data.

WARNING: If a callback is specified the data will be set to whatever it returns. Always return the data object, even if you didn't modify it.

Adds Bitmap Font files to the current load queue.

To create the Bitmap Font files you can use:

BMFont (Windows, free): http://www.angelcode.com/products/bmfont/ Glyph Designer (OS X, commercial): http://www.71squared.com/en/glyphdesigner Littera (Web-based, free): http://kvazars.com/littera/

You can choose to either load the data externally, by providing a URL to an xml file. Or you can pass in an XML object or String via the xmlData parameter. If you pass a String the data is automatically run through Loader.parseXML and then immediately added to the Phaser.Cache.

If URLs are provided the files are not loaded immediately after calling this method, but are added to the load queue.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getBitmapFont(key). XML files are automatically parsed upon load. If you need to control when the XML is parsed then use Loader.text instead and parse the XML file as needed.

The URLs can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the textureURL isn't specified then the Loader will take the key and create a filename from that. For example if the key is "megaFont" and textureURL is null then the Loader will set the URL to be "megaFont.png". The same is true for the xmlURL. If xmlURL isn't specified and no xmlData has been provided then the Loader will set the xmlURL to be the key. For example if the key is "megaFont" the xmlURL will be set to "megaFont.xml".

If you do not desire this action then provide URLs and / or a data object.

Check whether a file/asset with a specific key is queued to be loaded.

To access a loaded asset use Phaser.Cache, eg. Phaser.Cache#checkImageKey

Find a file/asset with a specific key.

Only assets in the download file queue will be found.

Get the queue-index of the file/asset with a specific key.

Only assets in the download file queue will be found.

Adds an Image to the current load queue.

The file is not loaded immediately after calling this method. The file is added to the queue ready to be loaded when the loader starts.

Phaser can load all common image types: png, jpg, gif and any other format the browser can natively handle.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the image via Cache.getImage(key)

The URL can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the URL isn't specified the Loader will take the key and create a filename from that. For example if the key is "alien" and no URL is given then the Loader will set the URL to be "alien.png". It will always add .png as the extension. If you do not desire this action then provide a URL.

Adds a JSON file to the current load queue.

The file is not loaded immediately after calling this method. The file is added to the queue ready to be loaded when the loader starts.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getJSON(key). JSON files are automatically parsed upon load. If you need to control when the JSON is parsed then use Loader.text instead and parse the text file as needed.

The URL can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the URL isn't specified the Loader will take the key and create a filename from that. For example if the key is "alien" and no URL is given then the Loader will set the URL to be "alien.json". It will always add .json as the extension. If you do not desire this action then provide a URL.

Add a JSON resource pack ('packfile') to the Loader.

A packfile is a JSON file that contains a list of assets to the be loaded. Please see the example 'loader/asset pack' in the Phaser Examples repository.

Packs are always put before the first non-pack file that is not loaded / loading.

This means that all packs added before any loading has started are added to the front of the file queue, in the order added.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

The URL of the packfile can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

Adds a physics data file to the current load queue.

The data must be in Lime + Corona JSON format. Physics Editor by code'n'web exports in this format natively.

You can choose to either load the data externally, by providing a URL to a json file. Or you can pass in a JSON object or String via the data parameter. If you pass a String the data is automatically run through JSON.parse and then immediately added to the Phaser.Cache.

If a URL is provided the file is not loaded immediately after calling this method, but is added to the load queue.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getJSON(key). JSON files are automatically parsed upon load. If you need to control when the JSON is parsed then use Loader.text instead and parse the text file as needed.

The URL can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the URL isn't specified and no data is given then the Loader will take the key and create a filename from that. For example if the key is "alien" and no URL or data is given then the Loader will set the URL to be "alien.json". It will always use .json as the extension.

If you do not desire this action then provide a URL or data object.

Remove all file loading requests - this is insufficient to stop current loading. Use reset instead.

Remove a file/asset from the loading queue.

A file that is loaded or has started loading cannot be removed.

Internal function that replaces an existing entry in the file list with a new one. Do not call directly.

Reset the loader and clear any queued assets. If Loader.resetLocked is true this operation will abort.

This will abort any loading and clear any queued assets.

Optionally you can clear any associated events.

Called automatically by ScaleManager when the game resizes in RESIZE scalemode.

This can be used to adjust the preloading sprite size, eg.

Adds a JavaScript file to the current load queue.

The file is not loaded immediately after calling this method. The file is added to the queue ready to be loaded when the loader starts.

The key must be a unique String.

The URL can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the URL isn't specified the Loader will take the key and create a filename from that. For example if the key is "alien" and no URL is given then the Loader will set the URL to be "alien.js". It will always add .js as the extension. If you do not desire this action then provide a URL.

Upon successful load the JavaScript is automatically turned into a script tag and executed, so be careful what you load!

A callback, which will be invoked as the script tag has been created, can also be specified. The callback must return relevant data.

Set a Sprite to be a "preload" sprite by passing it to this method.

A "preload" sprite will have its width or height crop adjusted based on the percentage of the loader in real-time. This allows you to easily make loading bars for games.

The sprite will automatically be made visible when calling this.

Adds a fragment shader file to the current load queue.

The file is not loaded immediately after calling this method. The file is added to the queue ready to be loaded when the loader starts.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getShader(key).

The URL can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the URL isn't specified the Loader will take the key and create a filename from that. For example if the key is "blur" and no URL is given then the Loader will set the URL to be "blur.frag". It will always add .frag as the extension. If you do not desire this action then provide a URL.

Adds a Sprite Sheet to the current load queue.

The file is not loaded immediately after calling this method. The file is added to the queue ready to be loaded when the loader starts.

To clarify the terminology that Phaser uses: A Sprite Sheet is an image containing frames, usually of an animation, that are all equal dimensions and often in sequence. For example if the frame size is 32x32 then every frame in the sprite sheet will be that size. Sometimes (outside of Phaser) the term "sprite sheet" is used to refer to a texture atlas. A Texture Atlas works by packing together images as best it can, using whatever frame sizes it likes, often with cropping and trimming the frames in the process. Software such as Texture Packer, Flash CC or Shoebox all generate texture atlases, not sprite sheets. If you've got an atlas then use Loader.atlas instead.

The key must be a unique String. It is used to add the image to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getImage(key). Sprite sheets, being image based, live in the same Cache as all other Images.

The URL can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the URL isn't specified the Loader will take the key and create a filename from that. For example if the key is "alien" and no URL is given then the Loader will set the URL to be "alien.png". It will always add .png as the extension. If you do not desire this action then provide a URL.

Start loading the assets. Normally you don't need to call this yourself as the StateManager will do so.

Adds a Text file to the current load queue.

The file is not loaded immediately after calling this method. The file is added to the queue ready to be loaded when the loader starts.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getText(key)

The URL can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the URL isn't specified the Loader will take the key and create a filename from that. For example if the key is "alien" and no URL is given then the Loader will set the URL to be "alien.txt". It will always add .txt as the extension. If you do not desire this action then provide a URL.

Adds a Tile Map data file to the current load queue.

You can choose to either load the data externally, by providing a URL to a json file. Or you can pass in a JSON object or String via the data parameter. If you pass a String the data is automatically run through JSON.parse and then immediately added to the Phaser.Cache.

If a URL is provided the file is not loaded immediately after calling this method, but is added to the load queue.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getTilemapData(key). JSON files are automatically parsed upon load. If you need to control when the JSON is parsed then use Loader.text instead and parse the text file as needed.

The URL can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the URL isn't specified and no data is given then the Loader will take the key and create a filename from that. For example if the key is "level1" and no URL or data is given then the Loader will set the URL to be "level1.json". If you set the format to be Tilemap.CSV it will set the URL to be "level1.csv" instead.

If you do not desire this action then provide a URL or data object.

Returns the number of files that have already been loaded, even if they errored.

Returns the number of asset packs that have already been loaded, even if they errored.

Returns the number of files still waiting to be processed in the load queue. This value decreases as each file in the queue is loaded.

Returns the number of asset packs still waiting to be processed in the load queue. This value decreases as each pack in the queue is loaded.

Transforms the asset URL. The default implementation prepends the baseURL if the url doesn't being with http or //

Adds a video file to the current load queue.

The file is not loaded immediately after calling this method. The file is added to the queue ready to be loaded when the loader starts.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getVideo(key).

The URL can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

You don't need to preload a video in order to play it in your game. See Video.createVideoFromURL for details.

Add a synchronization point to the assets/files added within the supplied callback.

A synchronization point denotes that an asset must be completely loaded before subsequent assets can be loaded. An asset marked as a sync-point does not need to wait for previous assets to load (unless they are sync-points). Resources, such as packs, may still be downloaded around sync-points, as long as they do not finalize loading.

Adds an XML file to the current load queue.

The file is not loaded immediately after calling this method. The file is added to the queue ready to be loaded when the loader starts.

The key must be a unique String. It is used to add the file to the Phaser.Cache upon successful load.

Retrieve the file via Cache.getXML(key).

The URL can be relative or absolute. If the URL is relative the Loader.baseURL and Loader.path values will be prepended to it.

If the URL isn't specified the Loader will take the key and create a filename from that. For example if the key is "alien" and no URL is given then the Loader will set the URL to be "alien.xml". It will always add .xml as the extension. If you do not desire this action then provide a URL.